How to Install Stock ROM unbrick Tecno Phantom 9

Stock ROM/Firmware For Tecno Phantom 9:

Official Stock ROM aka Flash File Now to be had for Tecno Phantom 9 within the article You Can Download Latest Firmware File For Tecno Phantom 9. You can use Official Firmware ^(http://www.rootraw.com/p/flash-file.html) to unbrick your Phone to Reset Device Functions and in Development ^(http://www.rootraw.com/search/label/LineageOS).

The Tecno Phantom 9 is Run on Android 9.0 OS Powered through Mediatek MT6765 Processor, this can be a Dual SIM (GSM and GSM) Smartphone/Tablet, Connectivity choices come with Wi-Fi, GPS, Bluetooth, Infrared, 3G and 4G. Sensors at the Phone come with Proximity sensor, accelerometer and Ambient gentle sensor.

Flashing ^(http://www.rootraw.com/search/label/Flash%20File) The legit Stock Rom on Tecno Phantom 9 Will Erase all Your Personal Data and you might be again on Stock ^(http://www.rootraw.com/search/label/Stock%20Rom) So Make a backup earlier than doing the rest, Follow Bellow Step through Step information to Install Official ROM on Tecno Phantom 9.
Note-
  1. This ROM/Recovery is figure on Listed Device handiest. Don’t do that on every other software.differently it reason bootloop,
  2. Follow the stairs appropriately differently it’s possible you’ll brick your software. We aren’t liable for any harm to your telephone.
  3. It will erase your entire information, so we propose you first to take an entire backup of your telephone after which continue.
  4. Ensure that Your Phone has a minimum of 50-60% charged to save you the unintended shutdown in-between the method
Read also-
  • How to Repair IMEI on Qualcomm Devices ^(http://www.rootraw.com/2018/02/repair-imei-qualcomm-snapdragon.html)
  • How to Port twrp for MT67XX Devices [without Source] ^(http://www.rootraw.com/2018/10/port-recoveries-twrp-cwm-philz-mt67xx.html)
  • How to Repair IMEI Number on Mediatek Devices[ All methods] ^(http://www.rootraw.com/2018/08/fix-repair-or-flash-stock-imei-number.html)
  • How to Flash Qualcomm Devices Using Qualcomm Upgrade equipment ^(http://www.rootraw.com/2018/02/flash-qualcomm-devices-using.html)
Downloads:
  1. SP Flash equipment Here ^(https://www.rootraw.com/2018/11/tools-sp-flash-tools-v5161200000-64bit.html)
  2. VCom Driver Here ^(http://www.rootraw.com/2018/07/how-to-install-vcom-driver-on-window.html)
  3. Firmware:
  • Tecno Phantom 9/9.0/All Regions/ Download ^(https://mega.nz/#!tw01lS4S!coym74MvAIwKiZ70uf9W7ZrYU9X_HeZj-YBXwWQxRCM)
Note: if You Will Face any Flashing factor then first load DA File from the Provided ROM Folder Then Flash. 
How to Install Stock ROM on Tecno Phantom 9
Step 1.Download SP flash equipment from above hyperlink and extract in a folder. from above on your software and extract in a folder.
Step 4.Go to Extracted SP equipment ^(https://androidfilehost.com/?fid=745425885120763929) folder and Run SP Flash equipment exe record.{extracted In Above Steps]
Step 5.in SP equipment pass to Download tab and click on on load scatter record and make a selection scatter File From Stock ROM Folder.
Step 6.make a selection what you need flash, Select Whole Rom
Step 7.Remove battery of your telephone and click on on obtain button and in an instant attach your smartphone into PC the use of usb.if Not Detect then insert battery and fix[if the battery is non Removable switch off phone and connect with battery]
Step 8.wait till flashing Done. it Will take a couple of Minut to flash the Device after Success. Switch on Phone.

  1. How to bypass FRP on This Phone Here ^(https://www.rootraw.com/2018/05/frp-bypass-mediatek.html)
Search tag-
Tecno Phantom 9 firmware, Tecno Phantom 9 inventory rom, Tecno Phantom 9 legit ROM, Tecno Phantom 9 downloads, Tecno Phantom 9 cara flash, Tecno Phantom 9 flashing,